Mimio MimioTeach

Descripción

Con un sistema interactivo MimioTeach™ puede:
Montarlo en la pizarra de forma magnética, así es fácil moverlo a diferentes aulas o quitarlo para guardarlo de forma segura.
Concentrarse en ser profesor, no un experto en tecnología.
Crear lecciones interactivas atractivas, centradas en los estudiantes, con el software MimioStudio.
Disfrutar de todas las herramientas que necesite para fomentar el aprendizaje interactivo.
Estar seguro de que su resistente diseño le ayudará durante años de uso en clase.
Ajustarse a los requisitos del presupuesto de su escuela.

El lápiz patentado MimioTeach es un lápiz fino y ergonómico que:
Se ajusta cómodamente a las manos de todos los tamaños.
Le permite controlar la información de su ordenador desde la pizarra magnética, sin cables.
Funciona automáticamente, por lo que no existe curva de aprendizaje.
Se recarga automáticamente en la barra MimioTeach.

El pequeño receptor inalámbrico MimioHub™ se conecta a un puerto USB del ordenador. El concentrador permite la integración automática con la barra MimioTeach y el lápiz, el sistema de evaluación MimioVote y el sistema de grabación de tinta MimioCapture.

Minimum System Requirements
Windows XP, Vista, and Windows 7
Mac OS 10.4
Linux: Fedora, openSUSE, and Ubuntu
For specific system requirements please visit us at: mimio.dymo.com/support/downloads

Software
MimioStudio 7 and higher.

Computer Interface
USB (USB 2.0 compliant).
USB Cable—“micro-B” USB connector.
MimioHub will connect via USB to the PC.

Data Transfer Rate—USB
Full-speed USB (12 Mbps).

Power Consumption
5V – 100mA DC via micro-USB

MimioTeach Bar Dimensions
375.4 mm H x 68 mm W x 38 mm D (14.8 in. H x 2.7 in. W x 1.5 in. D)

Weight
Bar: 305 g (10.75 oz)
Stylus: 30 g (1 oz)
Bar and Stylus: 335 g (11.82 oz)

Whiteboard Active Area (per device)
Interactive mode with projector supports 2 m x 2.4 m (6.6 ft x 7.9 ft.), up to 3 m (10 ft.) standard aspect ratio diagonal projection display, and 2.9 m (9.4 ft.) diagonal in wide screen mode.

Stylus
Ergonomically elegant stylus for interactive use.
Ultrasound at 40 kHz (frequency) + Infrared at 940 nm (wavelength).
Uses single 3.7 V Lithium-Ion rechargeable cell with 70 mAh capacity.
Stylus recharges when docked in cradle on left side of MimioTeach. Retains a charge for 8 – 10 hours.
Full recharge in 3 hours.
60-second safety shut-off.
Two buttons on the stylus activate functions: Right Click and MimioStudio Tools.
Solid Teflon stylus with replaceable tip ensures ultra-smooth action on all board or screen surfaces.

Resolution & Tracking Speed
Signal tracking frequency 87 times per second.
Signal tracking speed 2.7 m (9 ft) per second.
4,800 x 9,600 line effective resolution on 1.2 m x 2.4 m (4 ft x 8 ft) board.

Positioning
MimioTeach bar should be mounted on the left side of the whiteboard in a location outside the projection area. Sensors must face a projected surface that is within the maximum Active Area range of the device.

Controls & Indicators at the Whiteboard
2 push-button functions on the MimioTeach bar: Interactive mode and Calibrate/Re-calibrate.
1 Indicator: Link.

Temperature
Operating:16°C to 38°C (60°F to 100°F). (higher than 80°F/27°C will cause slight inaccuracy for ink capture)
Storage: -20°C to 35°C (-4°F to 95°F). (1 year set by battery)
-20°C to 45°C (-4°F to 113°F). (1 month set by battery)
-30°C to 60°C (-22°F to 140°F). (Absolute Maximum)

Humidity
Operating: 15% to 75% non-condensing.
Storage: 0% to 90% non-condensing.

Wireless Connectivity
Enables a dedicated 2.4 GHz bidirectional point-to-point wireless connection to the computer through MimioHub, a USB “thumb drive” receiver with maximum range of 9 m (30 ft).
Does not require Bluetooth, special card, wireless networks, or wireless PC.
MimioHub is a standard USB device using HID drivers, and comes paired with MimioTeach.
MimioHub can dock in the back slot of the MimioTeach bar when not in use.

Wireless Data Transfer Rate
250 Kbps

Certification & Compliance
Wireless: FCC, IC, CE, C-Tick, COFETEL, SCRF, SRMC, TELEC, RRL, TRA, ANRT, ANATEL, WPC, DGPT, CTI, MIC, SIRIM, MOC, CNC, SUBTEL, CRT, SUTEL, BURTEL, CONATEL, SIGET, SIT, PUC, TELCOR, ERSP, OSIPTEL, TATT, URSEC, UrkSEPRO, ICASA, NTRA, CITC, NCC.
Safety: UL/CSA/EN/IEC 60950-1 (CE & TUV NRTL) C-Tick, NOM, KCC, GOST, ANATEL, SII, UrkSEPRO, NCRS, VoC, CQC.
EMC: FCC, IC, CE, C-Tick, GOST, KCC, ANATEL, SII.
Environmental: RoHS, WEEE, REACH compliant.

International Use
Computer USB or batteries as primary power source enable “Start up and Go” in any country.
International USB, and AC Adapter for AC-powered use.

Product Warranty
Mimio hardware is warranted for 2 years from date of purchase, with an additional 3 years with product registration at Mimio.dymo.com/warranty, for a total of 5 years. MimioStudio software is supplied with a limited lifetime warranty, expiring 1 year after discontinuation of the product.

Other Accessories Available
USB extension cable, AAA batteries for MimioTeach battery operation, metallic mounting brackets w/removable adhesive strips for non-metallic surfaces, stylus, replaceable Lithium-Ion battery for
stylus, North American or International AC adapters.